End Ladders

There are 2 ladders on the MRC Wagon. One at each end and they are attached on the left side of the end of the wagon, they lead to an end platform that then allows access to the roof. The ladders in the kit are etched and need to be made up in a ladder forming jig (KRM Misc 004) to maintain uniformity, using 0.3mm or 0.4mm brass wire,(Your Choice) and attachd to the body.

The photos below will assist in placing the ladders on the end of the MRC. The following thum-nail images can be enlarged by clicking on them.

           

         

---

Created By ---- Keiran Ryan Models